GeekVape Wenax M1 Pod System device from Vape Shop UAE

GeekVape Wenax M1 Pod System device from Vape Shop UAE

With the GeekVape Wenax M1 Pod System. You can enjoy simple button-free auto-draw vaping and tight mouth-to-lung (MTL). Draws for a smokey, comfortable experience. With its disposable Geek Vape Wenax M1 Pod. Which has a 2mL vape juice capacity and a soft silicone-covered mouthpiece (drip tip). The Wenax M1 Mod’s 800mAh battery will last you the entire day. While you enjoy the tasty vapor flavor and medium vape clouds.

System Performance of the GeekVape Wenax M1 Pod

Because the Geek Vape Wenax M1 Mod has no buttons. All you have to do to vape it is draw on the drip tip (after you’ve filled it with e-liquid, of course). You also don’t have to worry about turning it off when you want to put it in your pocket or bag. Check out the remaining Wenax M1 Battery/Mod features. If you require your vaping experience to be simpler:

• Lightweight body: It’s simple to carry 34g in your pocket, hand, or purse!
• The robust, anodized aluminum body of your Wenax M1 Mod increases. Its resilience to wear and corrosion makes it more scratch- and corrosion-resistant.
• No options or buttons to make vaping more difficult—auto-draw.
• Constant power delivery: Unlike many other similar pod kits. The Wenax M1 Pod Kit will not cut down on power as the battery level drops. Rather, unless it needs to be recharged or has a new pod installed, it continuously provides the same draw.
• Depending on how much you smoke, the 800mAh built-in battery in the mod should last you a day.
• Tiny airflow holes enable extremely precise MTL draws.

Cartridge for GeekVape Wenax M1 Pods

The M1 Pods from Geek Vape are excellent for moderating tobacco leaves (MTL) vaping. Which involves drawing vapor to your mouth, holding it for a moment, and then inhaling it into your lungs. With the Wenax M1 Mod’s small airflow holes. High-resistance, low-wattage built-in coils, and slim drip tip or mouthpiece. You’ll get great MTL draws with a little throat hit (though this may vary depending on the e-liquid you use). Additional perfect characteristics of the GeekVape Wenax M1 Pods consist of:

• 2mL of e-liquid capacity is plenty for low-wattage vaping and won’t need to be topped off too often.
• Vaping hands-free like a cigar is made possible by the silicone ring surrounding the narrow drip tip, which GeekVape refers to as “lip-comfy.” This silicone gives lip comfort and grip, allowing you to “bite-vape” without holding it. Much like Sylvester Stallone does when he bites into his enormous cigars in practically all of his films.
• For inhaling tight MTL draws, the slim drip tip is ideal.
• Side-filling: You can use a thin-nozzle e-liquid bottle. Or a needle-nosed or unicorn-style e-liquid bottle to access the fill port protected. By a rubber plug on the side of the pod.

• Mellow vapor flavor delivery delivers a satisfying vapor flavor that is right on target.
• Clear-view Pod: The Wenax M1 Pod is sufficiently transparent to display your vape juice level, allowing you to refill before it runs out.
• Wenax M1 Pods snap firmly into place to prevent them from easily escaping and disappearing within your backpack.
• Last but not least, Wenax M1 Pods’ disposable design makes it simple for you to maintain the vape kit. Simply throw the pod out and replace it if it stops vaping the way it is. Used to (bad flavor, weak power, leaking, frequent gurgling). easy.

We may sum up our assessment of the Geek Vape Wenax M1 Pod Kit by saying that it is fundamentally simple. simple vaping. Simple upkeep. Very nice MTL vaporization!

Please be aware of:

• New pods include a protective sticker at the bottom. That needs to be removed before vaping for your device to function.
• Since the kit only comes with one pod. It might be a good idea to get a pack of GeekVape Wenax M1 Replacement Pods in addition to the kit since you can’t store all of your vape eggs in one pod basket.
• There isn’t a charging cable included with this kit. But if you don’t already have one, you may add one to your cart right away.
• Before use, new pods must be primed in order to prevent dry hits and coil burn. To prime your pod, fill it with e-liquid and let it soak the cotton coil for around five minutes before using it for vaping.

The GeekVape M1 Pod System Positionings:

• 115.5 x 16 mm in dimensions
• 34 grams in weight
• 2 mL capacity for e-liquid vapor
• Output power: 9–16 W
• Internally located 800mAh battery
• Resistance of the coil: 0.4–3 ohm
• USB Type-C port for charging
• Check your e-juice level with the “Clear-view” pod.
• “Lip-comfy” allows for comfortable vaping. included drip tip
• Pull-activated vaporizer
• robust, anodized aluminum body for added protection from mods
• Side-loading Pod
• For MTL vaping, a tight airflow

Review of the GeekVape Wenax M1 Pod System Overall

You won’t have to bother about exploring menu screens and pressing buttons. Thanks to the device’s basic design and inhale activation. To use the device, simply inhale via the mouthpiece. To help extend the life of your chosen pod, the adaptive power setting will choose the appropriate wattage automatically.

The side-filling method makes refilling your Wenax M1 pod simple. To add more e-liquid, simply unhook the stopper. There is no need to replace the coils because of its integrated coil construction. Instead, all you have to do is swap out the old pod for a new one. It’s simpler to keep an eye on your e-liquid levels with the Wenax M1 pods thanks to their transparent design. We recommend using this kit with 50% PG e-liquids or higher for optimal results. As the 1.2 Ohm coil delivers an MTL-style inhalation.

Note that there is no charging wire included with this kit.